Stainless Steels Manual Electrode E316L-15 thepa ea ho tjheseletsa mocheso oa khatello
THEKNOLOJI CHESE
Se lumelle lipotso
Tsoela pele ho u hlorisa
Arc ho hloka botsitso
Ho bopa ho sa kgahliseng
Spatter e feteletseng
E sebelisoa haholo ho manyolo, urea, petrochemical
thepa ea tlhahiso kapa polokelo sebopeho sa bohlokoa.
Low hydrogen tšepe e sa hloekang letsoho eleketrode, ka sehloohong
sebopeho ketlaase C-18%Cr-12%Ni-2%Mo, e babatsehang ntlha corrosion resistance
Ripple hantle
Ts'ebetso e ntle ea welding, khanyetso e ntle ea crack
Ho hanyetsa hantle ha porosity, ho hanyetsa mollo o motle oa ho roala,
thepa e tsitsitseng ea tšepe e kopantsoeng, sekhahla sa ho feta sa X-Ray se phahame.
Slagging e bonolo
Parameter ea sehlahisoa
KIKEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Cu | Tse ding |
GB/T MELAO | 0.035 | 1.53 | 0.61 | 0.027 | 0.004 | 11.26 | 18.7 | 2.1 | 0.10 | - |
MOSEBETSI OA MECHI:
LETLOTLO | MATLA A KOPA(MPa) | MATLA A KEKETSO(MPa) | IMAPACT BOHLOKO J/℃ | Phekolo ea mocheso °C*h | ||||
GB/T MELAO | 575 | 40 | - | - |
LITLHAKISO TSA TŠEBELETSO TSE KHOTHATSANG:
TLHALOSO EA DIAMETERS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
MOTLATSI (Amp) | H/W | 30-55 | 50-85 | 80-120 | 100-150 | 140-180 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |
Tšehetso ea fektheri
Sehlahisoa se loketse bakeng sa a
mefuta e mengata ea likopo
THEKNOLOJI CHESE
-
Matla a Satellite a Zhejiang
Tanka ea polokelo ea 3×60,000 m³LPG
-
49,000 lithane tse duplex
tanka ea lik'hemik'hale tse se nang tšepe
-
JU2000E
sethala sa ho cheka jack-up
KIKEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Cu | Tse ding |
GB/T MELAO | 0.035 | 1.53 | 0.61 | 0.027 | 0.004 | 11.26 | 18.7 | 2.1 | 0.10 | - |
MOSEBETSI OA MECHI:
LETLOTLO | MATLA A KOPA(MPa) | MATLA A KEKETSO(MPa) | IMAPACT BOHLOKO J/℃ | Phekolo ea mocheso °C*h | ||||
GB/T MELAO | 575 | 40 | - | - |
LITLHAKISO TSA TŠEBELETSO TSE KHOTHATSANG:
TLHALOSO EA DIAMETERS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
MOTLATSI (Amp) | H/W | 30-55 | 50-85 | 80-120 | 100-150 | 140-180 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |