Stainless Steels Manual Electrode E312-17 ore boat weld
THEKNOLOJI CHESE
Se lumelle lipotso
Tsoela pele ho u hlorisa
Arc ho hloka botsitso
Ho bopa ho sa kgahliseng
Spatter e feteletseng
E loketse mefuta eohle ea lisebelisoa tsa tšepe tse thata le ho thatafatsa
tšepe ea motsoako eo ho leng thata ho e cheseletsa ebile ho bonolo ho petsoha kapa ho ba le porosity
Acid mofuta oa mekhahlelo e 'meli ea tšepe ea letsoho e se nang tšepe, jet arc,
karolo e kholo ke 29%Cr-9%Ni, eo ka tloaelo e tsejoang e le "electrode ea bokahohleng.
Ripple hantle
Ts'ebetso e ntle ea welding, arc e tsitsitseng, sebopeho se setle,
ripple e tiea, ho phatloha ho honyenyane, ho tlosoa ha slag habonolo.
Ho roala ho na le khanyetso e ntle ea mollo, khanyetso e ntle ea porosity, le thepa e tsitsitseng ea tšepe ea tšepe e kopantsoeng
Slagging e bonolo
Parameter ea sehlahisoa
KIKEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Cu | Tse ding |
GB/T MELAO | 0.057 | 1.1 | 0.74 | 0.026 | 0.005 | 9.8 | 28.4 | 0.07 | 0.11 | - |
MOSEBETSI OA MECHI:
LETLOTLO | MATLA A KOPA(MPa) | MATLA A KEKETSO(MPa) | IMAPACT BOHLOKO J/℃ | Phekolo ea mocheso °C*h | ||||
GB/T MELAO | 800 | 25 | - | - |
LITLHAKISO TSA TŠEBELETSO TSE KHOTHATSANG:
TLHALOSO EA DIAMETERS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
MOTLATSI (Amp) | H/W | 30-55 | 50-85 | 80-120 | 100-150 | 140-180 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |
Tšehetso ea fektheri
Sehlahisoa se loketse bakeng sa a
mefuta e mengata ea likopo
THEKNOLOJI CHESE
-
Libarele tse limilione tse 2.3 tsa
SBM Fast4ward FPSO
-
GDS-2209/GXS-E330
sebaka sa marang-rang sa tube
Hainan Huasheng
phenol recovery tower
KIKEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Cu | Tse ding |
GB/T MELAO | 0.057 | 1.1 | 0.74 | 0.026 | 0.005 | 9.8 | 28.4 | 0.07 | 0.11 | - |
MOSEBETSI OA MECHI:
LETLOTLO | MATLA A KOPA(MPa) | MATLA A KEKETSO(MPa) | IMAPACT BOHLOKO J/℃ | Phekolo ea mocheso °C*h | ||||
GB/T MELAO | 800 | 25 | - | - |
LITLHAKISO TSA TŠEBELETSO TSE KHOTHATSANG:
TLHALOSO EA DIAMETERS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
MOTLATSI (Amp) | H/W | 30-55 | 50-85 | 80-120 | 100-150 | 140-180 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |