Stainless Steels Manual Electrode E310-15 petrochemical refining le chemical integration electrode
THEKNOLOJI CHESE
Se lumelle lipotso
Tsoela pele ho u hlorisa
Arc ho hloka botsitso
Ho bopa ho sa kgahliseng
Spatter e feteletseng
E loketse lihlahisoa tse hanyetsanang le mocheso o phahameng
joalo ka sebōpi sa mocheso o phahameng, lisebelisoa tsa ho pheha mashala,
e ka boela ea sebelisoa bakeng sa lisebelisoa tse sa tšoaneng tsa tjheseletsa.
hydrogen e tlaase e hloekileng ea austenitic tšepe e sa hloekang
elektrode ea letsoho, motsoako o ka sehloohong ke 25%Cr-20%Ni.
Ripple hantle
Ts'ebetso e tsitsitseng ea mocheso o phahameng,
e ka sebelisoa ho fihlela tikolohong ea 1150C
Ts'ebetso e ntle ea welding, khanyetso e ntle ea mollo,
ho hanyetsa porosity e ntle, thepa e tsitsitseng ea mechine ea tšepe e qhibilihisitsoeng.
Slagging e bonolo
Parameter ea sehlahisoa
KIKEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Cu | Tse ding |
GB/T MELAO | 0.102 | 1.66 | 0.4 | 0.27 | 0.005 | 21.8 | 25.6 | 0.06 | 0.10 | - |
MOSEBETSI OA MECHI:
LETLOTLO | MATLA A KOPA(MPa) | MATLA A KEKETSO(MPa) | IMAPACT BOHLOKO J/℃ | Phekolo ea mocheso °C*h | ||||
GB/T MELAO | 595 | 34 | - | - |
LITLHAKISO TSA TŠEBELETSO TSE KHOTHATSANG:
TLHALOSO EA DIAMETERS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
MOTLATSI (Amp) | H/W | 30-55 | 50-85 | 80-120 | 100-150 | 140-180 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |
Tšehetso ea fektheri
Sehlahisoa se loketse bakeng sa a
mefuta e mengata ea likopo
THEKNOLOJI CHESE
Harbin ea motlakase
liheke tse tharo tsa CMT
-
CJ50
porojeke ya jack-up
-
Xinjiang Kela 2 Bohareng
morero oa setsi sa kalafo
KIKEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Cu | Tse ding |
GB/T MELAO | 0.102 | 1.66 | 0.4 | 0.27 | 0.005 | 21.8 | 25.6 | 0.06 | 0.10 | - |
MOSEBETSI OA MECHI:
LETLOTLO | MATLA A KOPA(MPa) | MATLA A KEKETSO(MPa) | IMAPACT BOHLOKO J/℃ | Phekolo ea mocheso °C*h | ||||
GB/T MELAO | 595 | 34 | - | - |
LITLHAKISO TSA TŠEBELETSO TSE KHOTHATSANG:
TLHALOSO EA DIAMETERS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
MOTLATSI (Amp) | H/W | 30-55 | 50-85 | 80-120 | 100-150 | 140-180 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |